2 Operational Procedures
E
DIT
The number of the
Set Up
group last selected is displayed on the third line.
The fourth line contains one of the following:
n
If an ID was entered, the ID of the
Set Up
group is displayed.
n
If the
Set Up
group has been defined, but no ID was entered,
used
is displayed.
n
If the
Set Up
group has not been defined,
unused
is displayed.
n
If the
Set Up
group is being used and has been reset to a default configuration,
factory defaults
is displayed.
1. Enter the
Setup
number or select an existing number.
2. Select
Edit Setup.
3. Select
Analysis Conditions
,
Report Options
,
Communications
, or
System Options
.
4. Enter the information, as prompted.
2 - 2
Gemini VII Keypad Operator Manual
239-42801-01 (Rev E) — July 2021
