C
ANCEL AN
A
UTOMATIC
O
PERATION
Alt + Clear
Press
CHOICE
to display the options. Press
ENTER
to select.
1. To cancel the operation, press
ENTER
. Messages are displayed indicating the termination
is in progress. One of the following prompts is displayed:
2. Press
CLEAR
to remove the message from the keypad window. If an analysis is being
canceled and enough data have been collected for calculation, results are displayed. If
there were not enough data collected, the following prompt is displayed:
3. Press
CLEAR
to remove the message from the keypad window. To ignore the request for
cancellation and resume the operation, press
Alt + CLEAR
.
Cancel an Automatic Operation
Gemini VII Keypad Operator Manual
239-42801-01 (Rev E) — July 2021
2 - 19
