Microhard Systems IP-921, Operating Manual

Page: 49 / 173

© Microhard Systems Inc. CONFIDENTIAL 49
IP9xx Series
6.0 Configuration
IP Address Mode (continued)
If ‗DHCP‘ is selected, the three following fields (see Image 6F) will
be automatically populated by the DHCP server. The DHCP
Timeout value may be manually modified from the factory default
value.
Note that the factory default setting is DHCP.
If DHCP mode is selected,
but there is no DHCP server
available, after the DHCP
timeout period the units will
default to function simply as a
‘wireless bridge‘.
dhcp
static
dhcp
IP Address
If DHCP is selected (see above), a unique IP address will be
assigned to the IP Series; if STATIC IP address mode has been
selected, enter a suitable value for the specific network.
192.168.1.254
valid value is specific to the
network
Within any IP network, each
device must have its own
unique IP address.
Subnet Mask
For a small private network with IP addresses appearing similar to
192.168.1.xx (Class C address), the standard 255.255.255.0
subnet mask may be applicable.
If DHCP mode is selected (see above/top), the DHCP server will
populate this field.
255.255.255.0
valid value is specific to the
network
A SUBNET MASK is a bit
mask that separates the
network and host (device)
portions of an IP address.
The ‗unmasked‘ portion
l e a v e s
a v a i l a b l e t h e
information required to
identify the various devices
on the subnet.
Values
Values
Values