Microhard Systems IP-921, Operating Manual

Page: 15 / 173

© Microhard Systems Inc. CONFIDENTIAL 15
IP9xx Series
2.0 Quick Start
2.2 Text UI Method
(See Section 6.2 for more information re the Text User Interface.)
2.21 Required Materials

2 IP Series (with factory default configuration), each
with Power Adapter and Rubber Ducky Antenna

1 PC with NIC (ethernet) card and COM (serial) port
with HyperTerminal (or equivalent) application

1 Available connection to LAN*

1 Crossover patchcable (ethernet)*

1 MHS Diagnostic Cable (P/N MHS044000, black)
*dependent on desired test set-up
2.22 Set-Up Procedure

Connect a Rubber Ducky antenna to each IP Series.

Connect the Power Adapters to available 120VAC out-
lets, and to the IP Series.

Connect the MHS Diagnostic Cable to COM2 (front) of
one IP Series and the other end to an available COM
port on the PC.

Run HyperTerminal (or equivalent terminal program) on
the PC and configure it for the COM port chosen above,
115200bps, 8 data bits, no parity, 1 stop bit, and no flow
control.

Activate the HyperTerminal connection.

A login prompt will appear. Enter admin .

At the password prompt, enter admin .
continued...
Use the MHS-supplied power
adapter or an equivalent power
source.