Microhard Systems IP-921, Operating Manual

Page: 80 / 173

© Microhard Systems Inc. CONFIDENTIAL 80
IP9xx Series
6.0 Configuration
Network Name
All IP Series in a given network must have the same Network
Namw. This unique network address is not only a security feature
for a particular network, but also allows other networks - with their
own unique network address - to operate in the same area without
the possibility of undesired data exchange between networks.
Referring to the Network Profile configuration (detailed previously in
this section), the Network Name can also be used as the single
parameter to change when a Remote is to ‘switch‘ from operating
between distinct networks.
The Network Name is also taken into consideration in the frequency
hopping algorithm: change the Network Name and the hopping
pattern will change.
default is model-dependent
character string
Values
Link Rate
This is the RF communications Link Rate. A lower link rate offers
better receive sensitivity performance; a higher link rate, better
throughput. All IP Series in a network must use the same Link
Rate.
default value and available
rate(s) are model-dependent
Values
Change the default value for
the
Network Name to
something unique for your
network. Do this for an added
measure of security and to
differentiate
your network
from others which may be
operating nearby.
Public
Character string
Values
Authentication Key (continued)