© Microhard Systems Inc.
CONFIDENTIAL
33
IP9xx Series
5.0 Network Topologies
Example 5.2.1 (continued)
The ROAMING address for the REPEATER is set to 1:
the UNIT ADDRESS of the MASTER. This means that
this REPEATER will synchronize to, and communicate
directly with, the MASTER.
There is no DESTINATION UNIT field for remote units
in a PMP network: the destination is predefined as
‗1‘ (the MASTER ‗point‘).
On the following page are the configurations for the REMOTES.
Remote 20‘s ROAMING ADDRESS is set to 2, the
UNIT ADDRESS of the REPEATER. This Remote will
synchronize to the Repeater and communicate via the
Repeater to the Master.
Remote 30‘s ROAMING ADDRESS is set to 1 (the
UNIT ADDRESS of the MASTER): it will synchronize
to, and communicate directly with, the MASTER.
Image 5D: PMP Example 5.2.1: Repeater
When bench testing PMP with
a REPEATER in the network,
configure the REMOTE to
s y n c h r o n i z e
t o
t h e
R E P E A T E R
v i a
t h e
R E M O T E ‘ s
R O A M I N G
ADDRESS field. If this is not
done, with the REMOTE in
close
proximity
to
the
MASTER and its ROAMING
set
as
1
(default),
the
R E M O T E
w i l l
s i m p l y
synchronize with (and pass
data directly to) the MASTER,
bypassing the REPEATER
altogether.
Summary of Contents for IP-921
Page 165: ... Microhard Systems Inc CONFIDENTIAL 165 IP9xx Series Appendix B Upgrade Process DOS Prompt ...
Page 166: ... Microhard Systems Inc CONFIDENTIAL 166 IP9xx Series Appendix B Upgrade Procedure DOS Prompt ...
Page 169: ... Microhard Systems Inc CONFIDENTIAL 169 IP9xx Series Appendix E Mounting Dimensions ...