Maintenance
Maintenance - Reset & restore unit
Microsemi PDS-408G Web Management User Guide Ver. 1.0.1, 03-2019
90
17
MAINTENANCE
17.1
Maintenance - Reset & restore unit
Figure 17-1: Maintenance - Reset and Restore unit
Restart Device
- Performs software reset and restarts to the switch, followed by normal operation.
Restore device to factory Defaults excluding device network-Configuration
–
Restores device
configuration to factory default excluding network configuration, while maintaining the emote device
network connectivity for further configuration changes, followed by device reset.
Restore to full factory Defaults
– Restores the device to full factory default configuration, including
device default IP address, default VLAN, etc.
17.2
Maintenance – Unit Configuration
17.2.1
Download Unit configuration
Figure 17-2: Maintenance – Download unit configuration
This page allows you to download the unit configuration to your own laptop, desktop, etc. Before
downloading the unit configuration, you must select which configuration should be downloaded.
NOTE:
PoE power may remain unchanged, or go down and up according to the PoE Uninterruptable
Power parameter configuration
NOTE:
Connection to the device may be lost unless the remote user is connected on same local LAN,
or has direct access to the device over serial (USB virtual COMM).