Aggregation/LACP
Aggregation/LACP – LACP – View – Neighbor Status
Microsemi PDS-408G Web Management User Guide Ver. 1.0.1, 03-2019
73
•
Defaulted
- Shows if the Actors Receive machine is using Defaulted Operational Partner
information.
•
Expired
- Shows if that the Actors Receive machine is in the EXPIRED state.
11.7
Aggregation/LACP – LACP – View – Neighbor Status
This page provides a status overview for the LACP neighbor status for all ports. Only ports that are part
of an LACP group are shown
Figure 11-6: View LACP Neighbor Port Status
•
Port
- The switch port number.
•
State
- The current port state:
•
Down
- The port is not active.
•
Active
- The port is in active state.
•
Standby
- The port is in standby state.
•
Aggr ID
- The aggregation group ID which the port is assigned to.
•
Partner Key
- The key assigned to this port by the partner.
•
Partner Port
- The partner port number associated with this link.
•
Partner Port Priority
- The priority assigned to this partner port .
•
Activity
- The LACP mode of the group (Active or Passive).
•
Timeout
- The timeout mode configured for the partner port (Fast or Slow).
•
Aggregatio
n - Shows whether the partner considers this link to be "aggregateable"; i.e., a
potential candidate for aggregation.
•
Synchronization
- Shows whether the partner considers this link to be "IN_SYNC"; i.e., it has
been allocated to the correct LAG, the group has been associated with a compatible
Aggregator, and the identity of the LAG is consistent with the System ID and operational Key
information transmitted.
•
Collecting
- Shows if collection of incoming frames on this link is enabled.
•
Distributing
- Shows if distribution of outgoing frames on this link is enabled.
•
Defaulted
- Shows if the partners Receive machine is using Defaulted Operational Partner
information.
•
Expired
- Shows if that the partners Receive machine is in the EXPIRED state.