RADIUS,
RADIUS - Configuration –
Microsemi PDS-408G Web Management User Guide Ver. 1.0.1, 03-2019
64
•
Change secondsret Key
- Specify to change the secret key or not. When the checkbox is
checked, you can change the setting overrides the global key. Leaving it blank will use the
global key.
10.3
RADIUS - Configuration –
Figure 10-2: Configuration
10.3.1
Global Configuration
The global configuration section contains all default values to be used whenever a user adds
new Server and leaves identical fields blank.
•
Timeout
- Timeout is the number of seconds, in the range 1 to 1000, to wait for a reply from a
server before it is considered to be dead.
•
Deadtime
- Deadtime, which can be set to a number between 0 to 1440 minutes, is the period
during which the switch will not send new requests to a server that has failed to respond to a
previous request (dead). This should stop the switch from continually trying to contact a server
that it has already determined as dead.
•
Change secondsret Key
- Specify to change the secret key or not. When "Yes" is selected,
you can change the secret key - up to 63 characters long - shared between the
server and the switch.
10.3.2
Server Configuration
•
Delete
- Check this box to delete a server entry. The entry will be deleted during the
next Save.
•
Hostnam
e - The IPv4/IPv6 addressor hostname of the server.
•
Port
- The
port to use on the server for authentication.
•
Timeout
- This optional setting overrides the global timeout value. Leaving it blank will use the
global timeout value.
•
Change secondsret Key
- Specify to change the secret key or not. When the checkbox is
checked you can change the setting overrides the global key. Leaving it blank will use the
global key.
NOTE:
Setting the Deadtime to a value greater than 0 (zero) will enable this feature, but only if more
than one server has been configured