Network (IPs MAC)
Network - Configuration – Ipv4/6
Microsemi PDS-408G Web Management User Guide Ver. 1.0.1, 03-2019
25
4.2.2.2 Dynamic DHCPv4 IPv4 Address Configuration
For IPv4 dynamic DHCP IP address configuration, you need to configure the following:
DHCPv4
Parameter
Description
Enable
Enable/Disable DHCPv4.
NOTE:
Enabling DHCPv4 removes static IPv4 address configuration, which
means that whenever DHCPv4 is disabled, the user must reconfigure
IPv4 static address.
Client-ID
(opt#61)
DHCPv4 – Client-ID (opt#61) has three configuration options:
IF-MAC: DHCPv4 client will use unit MAC a port index as option #61
ASCII:
Text string
HEX:
Hexadecimal number
Hostname
(opt#12)
Text string
Table 4-5: DNS Server Configuration options
4.2.2.3 Static/Dynamic DHCPv6 Address Configuration
•
Static IPv6 address
– Configure IPv6 address and IPv6 mask (prefix)
•
DHCPv6 address
– Enable DHCPv6 checkbox.
Figure 4-3: Dynamic/Static IPv6 Address Configuration.
4.2.3
IP Routes (Default-Gateway) configuration
The IP routes section controls which default gateway to use when an IP address should be sent by the
unit management interface to another network outside of the unit local LAN.
NOTE:
DHCPv4 dynamically obtained IPv4 address will be displayed on the Current Lease column.