Network (IPs MAC)
Network - Configuration – NTP (Network Time Protocol)
Microsemi PDS-408G Web Management User Guide Ver. 1.0.1, 03-2019
26
Figure 4-4: IP Routes (Default-Gateway) configuration
NOTE:
To route all unknown destination IP to a default gateway, please add the following line:
network=0.0.0.0, Mask Length=0, Gateway=<Gateway-IP> , Distance=1
Different IP networks may have different IPv4/v6 gateways. Please use the configuration as in the note
above to route all unknown destination IP traffic to the same default gateway. In case there are multiple
path options, please use the appropriate Distance/Next-Hop cost field to prioritize one path over the
other.
4.3
Network - Configuration – NTP (Network Time Protocol)
This page is used to configure the unit NTP Servers IP. The NTP Server updates the unit with the
correct GMT (Greenwich Mean Time).
Figure 4-5: NTP Server configuration
4.4
Network - Configuration – Time Zone
This page is used to configure the unit’s local time zone and daylight saving.
4.4.1
Time Zone Configuration
Figure 4-6: Time Zone Configuration