Managing the unit over the web – a general walk-through
Default unit IP, username and password.
Microsemi PDS-408G Web Management User Guide Ver. 1.0.1, 03-2019
13
2
MANAGING THE UNIT OVER THE WEB – A GENERAL WALK-THROUGH
This section describes how to manage the new unit or after the unit has been restored to factory
default, how to change the unit configuration, save the new unit configuration, etc.
2.1
Default unit IP, username and password.
The unit is shipped with the following default configuration parameters.
•
Ports 1-11 VLAN
VLAN1 (access mode).
•
Default VLAN1 IP Address:
192.168.0.50
•
Default login username is:
admin
•
Default login password:
blank (no password)
SNMP -
disabled by default due to security concerns. It is recommended to enable SNMP only after
changing the SNMP default passwords.
Web
– the interface is configured as HTTP. Please change to HTTPS whenever there are security
concerns.
2.2
Web interface overview
Page items 1-5 (see below) are always displayed on all web pages regardless of whether the page is
accessible to the user. Please note that the refresh button will be presented only on selected web
pages.
Figure 2-1: Unit overview main Web page
1. The left panel provides an all-switch configuration/view. Each topic includes all sub-pages relevant
for this topic. Pressing on the topic title (for example VLAN) will reveal the sub-pages. Pressing on
the topic again will hide the sub-pages.
2. The Home icon at the top-right redirects to the main web page as shown in figure 2-1.
3. Pressing on the
Refresh
button will refresh the current page. Please note that the
Refresh
button
will only be available on selected web pages.