Network (IPs MAC)
Network - Configuration – Ipv4/6
Microsemi PDS-408G Web Management User Guide Ver. 1.0.1, 03-2019
24
4.2
Network - Configuration – Ipv4/6
This page allows you to configure the IP address of DNS Servers, or how the Switch should obtain such
DNS IP address over DHCPv4/6 and from which VLAN.
4.2.1
DNS Servers
Multiple DNS Servers can be configured with the following options:
DNS configuration option
Description
No DNS Server
No DNS server – Only numeric IP address services should be used
(as SysLog, etc).
Configured IPv4 or IPv6
IPv4 or IPv6 Server address, except Link-Local. For example,
192.168.0.1 or 1234::1
From any DHCPv4 VLANS-ID
The first DNS server offered from a DHCPv4-enabled interface.
From this DHCPv4 VLANS-ID
DNS server offered from a DHCPv4-enabled interface over specific
VLAN-ID.
From any DHCPv6 VLANS-ID
The first DNS server offered from a DHCPv6-enabled interface.
From this DHCPv6 VLANS-ID
DNS server offered from a DHCPv6-enabled interface over specific
VLAN-ID.
Table 4-4: DNS Server Configuration options
4.2.2
IPv4 / IPv6 Interfaces
IP address configuration can be done for every VLAN-ID in use. The configured IP address for each
VLAN-ID can be from type IPv4, IPv6 or both. IPv4 address and IPv6 address can be configured as
static or dynamic from type DHCPv4, DHCPv6.
4.2.2.1 Static IPv4 Address Configuration
Whenever configuring static IPv4 address (DHCPv4 checkbox is unchecked), all irrelevant DHCPv4
fields will become gray and unwritable. You only need to configure VLAN-ID, IPv4 address, and IPv4
mask length (for example 24 is equivalent to 255.255.255.0)
Figure 4-2: Static IPv4 Address Configuration.
NOTE:
To delete an IP address raw, select the Delete checkbox and press Save