Network (IPs MAC)
Network - Configuration – SysLog Report
Microsemi PDS-408G Web Management User Guide Ver. 1.0.1, 03-2019
27
4.4.2
Daylight Saving Time Configuration.
Figure 4-7: Daylight Saving Time Configuration
4.5
Network - Configuration – SysLog Report
This page is used to configure the SysLog Server IP address. The unit sends SysLog messages during
Power-up and normal operation. The SysLog events are sent by the unit over the network to the
SysLog Server. The user has the option to filter some of the SysLog messages being sent by the unit,
by configuring the severity/importance of the SysLog messages that will trigger the sending.
Figure 4-8: SysLog configuration
4.6
Network - Configuration – MAC Table learning
This page provides various options regarding the way MAC address learning should be processed by
the Ethernet Switch, and how to process a packet with an unknown source MAC address, unknown
destination MAC address, etc.
When a packet is received, it is classified by its Source-MAC, Destination-MAC, VLAN-ID and Port
number. As part of the Ethernet Switch forwarding algorithm, the switch will look for Destination-MAC
and VLAN inside the MAC learning table. If it is found, then the packet will be forwarded to the specified
port; otherwise the packet is flooded to all ports on the same VLAN.