P.13
8008_inst.7/7/04.qx
LIST OF PROGRAMMABLE FEATURE SETTINGS
• To Change A Setting From Default Press The “PANIC” Button On The Remote Control. (Siren Will Emit A Long Chirp)
• To Return A Setting To Default, Press The “LOCK” Button On The Remote Control. (Siren Will Emit A Short Chirp
)
Feature:
1. (UNLOCK WIRE #1) SINGLE (OR) DOUBLE UNLOCK PULSE(S):
The First Unlock Wire, The Wire Which Provides An Unlock Pulse When The Alarm Is Disarmed, Will Provide Either A
(Default) SINGLE Unlock Pulse (OR) A Programmable DOUBLE Unlock Pulse When The Alarm Is Disarmed.
NOTE:
The Double Unlock Pulse Is For 1995+ Nissan Maximas & Some VW’s Which Require A Double Pulse To
Unlock The Doors.When This Feature is Accessed The Green Wire “LOCK” Will Provide a Double Lock pulse.
DEFAULT: * SINGLE UNLOCK PULSE:
The (-) Pink Unlock Wire & The (+) Green Unlock Wire Will Provide A Single
Pulse Upon Disarming The Alarm.
* DOUBLE UNLOCK PULSE:
The (-) Pink Unlock Wire & The (+) Green Unlock Wire Will Provide 2 Pulses Upon Disarming
The Alarm & The Green Wire Will Provide a Double Lock
Pulse
2. (UNLOCK WIRE #2) SINGLE (OR) DOUBLE UNLOCK PULSES:
The (BLUE) Second Unlock Wire, The Wire Which Provides An Unlock Pulse When Remote Button “Unlock” Is Pressed
A Second Time Within 3-Seconds Of Disarming The Alarm, Will Give Either A (Default) SINGLE Unlock Pulse (OR) A
Programmable DOUBLE Unlock Pulse When The Alarm Is Disarmed.
NOTE:
The Double (-) Unlock Pulse Is For 1995+ Nissan Maximas. The Double (-) Pulse Can Be Converted To A Double
(+) Pulse By Using A Relay For Use In Some VW’s Which Require A Double (+) Pulse To Unlock The Doors. When This
Feature is Accessed The Green Wire “LOCK” Will Provide a Double Lock pulse.
DEFAULT: * SINGLE UNLOCK PULSE:
The (-) Blue Unlock Wire Will Provide A Single (-) Unlock Pulse Upon A second
Press Of The Remote Control Button Within 3-Seconds Of Disarming The Alarm.
* DOUBLE UNLOCK PULSE:
The (-)Blue Wire Will Provide 2 (-) Unlock Pulses Upon A Second Press Of The Remote
Control Button Within 3-Seconds Of Disarming The Alarm & The Green Wire Will Provide a Double Lock
Pulse
3. PARKING-LIGHT ILLUMINATION:
The Vehicle’s Parking-Lights Can Be Programmed To Stay On For 30-Seconds After Disarming The Alarm. They will
Reset (Turn Off) With Any Remote Control Command Or By Turning ON The Vehicle’s Ignition.
DEFAULT: * PARKING-LIGHT ILLUMINATION OFF.
* PARKING-LIGHT ILLUMINATION ON.
NOTE:
The Parking Lights Still Flash Twice Upon Disarming If Parking Light Illumination Is Defeated.
4. AUXILIARY OUTPUT CHANNEL #1 (TRUNK-POP or REMOTE START)
The Alarm’s Auxiliary Output Channel #1 Can Be Programmed To Provide A (-) Pulse And Disarm The Alarm For
Trunk/Hatch Release (OR) To Provide A (-) Pulse With Sensor By-Pass For Interface With A Remote Start Module.
(The Alarm Remains Armed)
DEFAULT: * AUX #1 TRUNK-POP OUTPUT WITH DISARM.
* AUX #1 CAR-START INTERFACE WITH SENSOR BY-PASS. (The Alarm Remains Armed)
5. AUXILIARY OUTPUT CHANNEL #2: (CONSTANT or LATCHED)
The Alarm’s Auxiliary Channel Output #2 Can Be Programmed To Provide a Constant (As long As Button Is Held
Down(-)Pulse (OR) A Latched (-)Pulse For 30-Seconds. The Latched Output Would Reset With (Turn Off) A Remote
Control Command.
DEFAULT: * AUX #2 CONSTANT PULSE.
* AUX #2 LATCHED 30-SECONDS.
6. ANTI HI-JACK PROTECTION
DEFAULT: * ACTIVE ANTI HI-JACK PROTECTION OFF
* ACTIVE ANTI HI-JACK PROTECTION ON
Summary of Contents for 8008-04
Page 22: ...P 22 8008_inst 7 7 04 qx NOTE...
Page 23: ...p 23 8008_inst 7 7 04 qx NOTE...
