P.9
8008_inst.7/7/04.qx
VALET/OVERRIDE BUTTON:
The Valet/Override Button Has Two Functions:
1) To Allow The User To Place The Alarm In The Valet Mode.
2) To Perform An Emergency Override In The Case That The Remote Control Is Lost Or Broken.
CONNECTION:
Mount Where Desired And Plug It In.
VALET MODE:
Valet Is A Special Mode In Which All Of The Alarm’s Security Functions Are Disabled Converting The
Alarm Into A Deluxe Keyless Entry System. Valet Mode Allows The User To Turn Off The Security Portion Of The
System While Retaining All Convenience Features. Panic, Keyless Entry, Dome & Parking Light Illumination, As Well
As Both Auxiliary Channels Will Continue To Work In The Valet Mode. This Is For Situations In Which It Is Not
Convenient For The Alarm To Be Armed (ie: Car-wash, Mechanic, etc)
TO ENTER VALET MODE:
1. Turn Vehicle’s Ignition On.
2. Press And Hold The Valet/Override Button For 5 Seconds.
3. The LED Will Light Solid & The Siren Will Emit A Series Of Chirps To Confirm Entry Into Valet Mode.
TO EXIT VALET MODE:
1. Turn Vehicle’s Ignition On.
2. Press And Hold The Valet/Override Button For 5 Seconds.
3. The LED Will Turn Off & The Siren Will Emit A Series Of Chirps To Confirm Exit From Valet Mode.
EMERGENCY OVERRIDE:
In The Case That The Alarm’s Remote Control Is Lost Or Broken, The User Can Perform
An Emergency Override To Disarm The Alarm. An Emergency Override Would Automatically Enter The Alarm Into An
Emergency Protection Mode Which Would Allow The User To Maintain Security On The Vehicle Until A Replacement
Remote Control Is Available.
NOTE:
Emergency Protection Mode Only Operated If Alarm Is Programmed For Passive Arming.
EMERGENCY OVERRIDE PROCEDURE: (The Alarm Must Be Armed)
1. Turn Vehicle’s Ignition On.
2. Press And Hold The Valet/Override Button For 5 Seconds.
3. The LED Will Stop Flashing & The Siren Will Stop Sounding.
4. The Alarm Is Now In Emergency Protection Mode.
EMERGENCY PROTECTION MODE:
This Mode Is Automatically Entered Any Time An Emergency Override Is
Performed While The Alarm Is Armed. In This Mode, Only The Shock Sensor Is Bypassed. The Starter Kill Is
Completely Operational And The Doors Triggers Have A 30-Second Entry Delay. The User Must Turn “On” The
Vehicle’s Ignition Within 30-Seconds Of Opening A Door Or The Alarm Will Trigger.
Emergency Protection Mode Will Automatically Reset And The Alarm Will Return To Normal Operation As Soon As A
Remote Control Is Used To Operate The Alarm. If At Any Time The User Desires To Turn “OFF” The Emergency
Protection Mode, The Alarm May Be Entered Into Valet Mode. (See Valet Mode Section)
How It Works:
1. An Emergency Override Is Performed, The Alarm Is Now In Emergency Protection Mode.
2. The Emergency Protection Mode Will Self-Arm 30 Seconds After The Vehicle Is Turned Off And The Last Door Is
Closed. (Standard Self-Arming Procedure)
3. The Siren Will Emit A Chirp, The Lights Will Flash One Time, & The LED Will Flash Slowly To Confirm That The
System Is Armed.
4. If Any Vehicle Door Is Opened, A 30 Second Count Down Will Begin. The LED Will Flash Rapidly & The Siren Will
Emit A Chirp Every 2 Seconds To Alert The User That The System Must Be Disarmed.
.
5. To Disarm The System, The Vehicle’s Ignition Must Be Turned ON Within 30 Seconds Of Opening A Door.
6. If The Ignition Is Not Turned On Within 30 seconds The System Will Trigger. An Emergency Override Must Then Be
Performed To Disarm The System. (See Emergency Override Section).
7. Emergency Protection Mode Will Reset Any Time A Remote Control Is Used To Operate The System.
NOTE:
Emergency Protection Mode Only Operated If Alarm Is Programmed For Passive Arming.
TURN IGNITION TO
THE “ON” POSITION
PRESS & HOLD
VALET/OVERRIDE BUTTON
FOR 5 SECONDS
THE SIREN WILL EMIT A SERIES OF CHIRPS TO CONFIRM ENTRY/EXIT FROM VALET MODE
NOTE:
THE LED WILL LIGHT SOLID WHEN IN VALET MODE.
Summary of Contents for 8008-04
Page 22: ...P 22 8008_inst 7 7 04 qx NOTE...
Page 23: ...p 23 8008_inst 7 7 04 qx NOTE...
