32
Implement Wheels
1. Secure magnets mechanically or with epoxy.
2. Rigidly mount sensor mounting bracket to the wheel
assembly. Cut or bend “L” bracket as required for proper
positioning of sensor.
3. Install sensor, adjust to correct spacing (1/4” to 1/2 “
or 6 to 13 mm is recommended), and secure with 3/8”
locking nuts.
See Illustration on the right.
Front Tractor Wheel
1. Magnets may also be secured with a cable tie and an
adhesive such as epoxy.
2. Mount the speed sensor bracket to a part of the wheel
assembly that does not change position to the hub
when the wheels are turned. If the “L” bracket provided
cannot be bent and mounted to properly position the
sensor, make a bracket similar to the one shown at right.
3. Install sensor, adjust to correct spacing (1/4” to 1/2 “
or 6 to 13 mm is recommended), and secure with 3/8”
locking nuts.
See Illustration on the right.
Appendix A
Speed Sensor Mounting Installation
Speed Sensor
and Bracket
¼” Bolts,
Lockwashers
and Nuts
Speed Sensor
Cable Tie
Cable Tie
Speed Sensor
Tap thread for
bolts or weld
FABRICATED BRACKET
Sensor
3/8” nut
Optional section
of hose to
protect cable
3/8” nut
3/8” hole
for sensor
Hub
Top View
