25
After the “-” (RESET) button has been held for 3 seconds,
the “CLEAr” message will be replaced by 0.0, indicating that
counter pair #3 has been cleared.
When the desired counter number is displayed, press the
“-” (RESET) button and “CLEAr” will be displayed.
NOTE:
holding the “-” (RESET) button for 2 seconds will clear both
the #3 AREA counter and the #3 VOLUME counter whether
the rotary switch is in the AREA or the VOLUME position.
If
the “-” button is released before 2 seconds have elapsed,
the counters will not be cleared and the “CLEAr” message
will be replaced with the previous total.
MT-NH3 II
™
AUTO
MAN
CAL
RESET
RATE
ACTUAL “N”
TOTAL NH3
(1) (2) (3)
AREA
(1) (2) (3)
NH3 PER
MINUTE
TANK (NH3)
DISTANCE
AREA/
HOUR
SPEED
FLOW
CAL
MIN
FLOW
ADJUST
RATE
TARGET
RATE
WIDTH
CAL
SPEED
CAL
3
3
Console Operation
(cont)
Clearing Counters
