Micro Prose X-COM UFO DEFENSE Manual Download Page 38

Page: 38 / 134

PAGE

SECTION

29. You will see four flashing yellow dots on the map; these are your
soldiers. If a UFO has been spotted, its hull appears as a pale grey
line.

30. The map only shows one level of the Battlescape at a time.

• Click on the up/down arrows on the left-hand side of the screen to
display the next level up or down.

31. • Click on the Right Mouse Button to return to the Battlescape.

The Turn-Based System

32. If you saw a UFO on the Map screen, start moving your soldiers
toward it. If not, continue moving your soldiers around the
Battlescape until you find the UFO.

Eventually the message

Not Enough Time Units! appears.

4882 - 7439

UFO

UFO Manual E1 for PDF 2/19/97 7:46 PM Page 37

Summary of Contents for X-COM UFO DEFENSE






































































































































Search results

Summary of Contents for X-COM UFO DEFENSE

Reviews:

Related manuals for X-COM UFO DEFENSE

Brands by name

Popular brands

Micro Prose X-COM UFO DEFENSE, Manual

Search results

Summary of Contents for X-COM UFO DEFENSE

Reviews:

Related manuals for X-COM UFO DEFENSE

Brands by name

Popular brands