Micro Prose X-COM UFO DEFENSE Manual Download Page 30

Page: 30 / 134

3107 - 6669

PAGE

SECTION

Investigating the Crash Site

27. You will need to assign a Skyranger transport to take a squad of
soldiers from your base to the Crash Site.

• Find your base (you may need to rotate the Geoscape to bring it into
view). Click on your base: the

Launch Interception window will

appear.

28. • Move the mouse pointer to highlight Skyranger-1 and click.

29. The message

Select Destination appears in the top of the

screen.

30. • Click on the UFO Crash Site (the white cross) to select this as the
Skyranger’s target.

31. The message

Target: Crash Site-1 will appear.

• Click on the

OK button.

32. The Skyranger (represented by a yellow cross) will launch and make
its way to the UFO Crash Site.

• Click on the

5 Mins button if you want to increase the passage of

time.

33. When the Skyranger arrives at the Crash Site, the UFO Crash
Recovery screen will appear. Read the instructions on this screen.

• Click on the

OK button to enter the next section of X-COM UFO

Defense; the Battlescape.

UFO Manual E1 for PDF 2/19/97 7:45 PM Page 29

Summary of Contents for X-COM UFO DEFENSE






































































































































Search results

Summary of Contents for X-COM UFO DEFENSE

Reviews:

Brands by name

Popular brands

Micro Prose X-COM UFO DEFENSE, Manual

Search results

Summary of Contents for X-COM UFO DEFENSE

Reviews:

Brands by name

Popular brands