Micro Prose X-COM UFO DEFENSE Manual Download

Page: 76 / 134

7464 - 9702

PAGE

SECTION

The message

UFO-

(number)

Tracking Lost will appear if

X-COM tracking devices lose contact with a UFO while it is being
intercepted.

Click on the

OK button. The Craft Status window will appear, giving

you the option to either

Return to Base, Patrol or Go to Last

Known UFO Position.

It is usually best to go to the last known UFO position, since the
interception craft may be able to re-acquire the UFO with its on-
board radar.

2.6.7 THE AIR-TO-AIR COMBAT WINDOW

When the X-COM craft has maneuvered within firing range of the
UFO, the Air-to-Air Combat window will appear. The interception
craft is now at stand-off range, awaiting your orders.

Remember that you are setting out to cause the UFO to crash land,
not to blow it into a million pieces!

The Air-to-Air Combat window consists of the following:

Minimize Window Icon

Order Buttons

Radar Screen

Weapons Display

Damage Display

Range to the UFO

Message Box

UFO Manual E2 for PDF 2/19/97 8:00 PM Page 75

Summary of Contents for X-COM UFO DEFENSE






































































































































Search results

Summary of Contents for X-COM UFO DEFENSE

Reviews:

Related manuals for X-COM UFO DEFENSE

Brands by name

Popular brands

Micro Prose X-COM UFO DEFENSE, Manual

Search results

Summary of Contents for X-COM UFO DEFENSE

Reviews:

Related manuals for X-COM UFO DEFENSE

Brands by name

Popular brands