Micro Prose X-COM UFO DEFENSE Manual Download Page 84

Page: 84 / 134

0915 - 7288

PAGE

SECTION

To unload ammunition from a weapon, pick up the loaded weapon
and click on the

Unload button. The weapon will go to the soldier’s

right hand and the ammunition to the left. To carry this out, both of
the soldier’s hands must be empty.

When you have finished equipping your soldiers, click on the

button to enter the main part of the Ground Assault; the Battlescape.

3.2 THE BATTLESCAPE SCREEN

The Battlescape screen is a 3-D display which allows you to control a
small squad of heavily-armed X-COM soldiers.

3.2.1 USING THE BATTLESCAPE

Your squad starts the mission in their transport craft. The soldier
nearest to the craft’s exit ramp has a yellow arrow to show that he/she
is selected, ready to move out.

UFO Manual E2 for PDF 2/19/97 8:00 PM Page 83

Summary of Contents for X-COM UFO DEFENSE






































































































































Search results

Summary of Contents for X-COM UFO DEFENSE

Reviews:

Brands by name

Popular brands

Micro Prose X-COM UFO DEFENSE, Manual

Search results

Summary of Contents for X-COM UFO DEFENSE

Reviews:

Brands by name

Popular brands