Micro Prose X-COM UFO DEFENSE Manual Download

Page: 27 / 134

PAGE

Air-to-Air Combat

19. If the Interceptor gets within range of the UFO, the Geoscape will
automatically increase in magnification and the Air-to-Air Combat
window will appear over the center of the Geoscape.

20. UFOs should not be shot down over water because you will not be
able to examine the wreckage.

• Click on the minimize window icon in the top-left of the Air-to-
Air Combat window. The craft icon will appear in the top-left of the
screen.

Check that the UFO is over dry land. If it is over the sea, you can use
the

1 Min Time Control to accelerate the passage of time.

SECTION

Craft Icon

UFO Manual E1 for PDF 2/19/97 7:45 PM Page 26

Summary of Contents for X-COM UFO DEFENSE






































































































































Search results

Summary of Contents for X-COM UFO DEFENSE

Reviews:

Related manuals for X-COM UFO DEFENSE

Brands by name

Popular brands

Micro Prose X-COM UFO DEFENSE, Manual

Search results

Summary of Contents for X-COM UFO DEFENSE

Reviews:

Related manuals for X-COM UFO DEFENSE

Brands by name

Popular brands