MICRO-EPSILON surfaceCONTROL SC2500, Operating Instructions Manual

Page: 9 / 42

Page 9
Functional Principle, Technical Data
surfaceCONTROL 3D SC2500 / SC2510
3.2 Technical Data
surfaceCONTROL 3D SC2500-300 SC2510-300 SC2500-400 SC2510-400 SC2500-575 SC2510-575
Measurement area
Length (x) * width (y)
at distance (z)
Start 260 x 190 mm (475 mm) 350 x 260 mm (660 mm) 500 x 375 mm (950 mm)
Mid 300 x 220 mm (550 mm) 400 x 300 mm (760 mm) 575 x 435 mm (1100 mm)
End 340 x 250 mm (625 mm) 450 x 340 mm (860 mm) 650 x 495 mm (1250 mm)
Working distance z 550 ±75 mm 760 ±100 mm 1100 ±150 mm
Resolution
x,y 250 µm 300 µm 500 µm
z
1
8.5 µm 12.7 µm 24 µm
Repeatability
z(
s
)
1 < 3.0 µm < 4.5 µm < 8.5 µm
Acquisition time
2, 3
0.5 … 1 s
Light source LED
Supply voltage 18 VDC ±33 %
Current consumption 6 … 12.5 A
Connection 8-pin M12 socket for Gigabit Ethernet camera 1, connection to controller,
8-pin M12 socket for Gigabit Ethernet camera 2, connection to controller,
4-pin LEMO push-pull plug for sensor control (USB), connection to controller,
2-pin LEMO push-pull plug for supply voltage
Installation Mounting via flange adapter (see accessories)
Temperature range
4
Storage -10 ... +50 °C (+14 ... +122 °F), non-condensing
Operation +5 … +40 °C (+41 ... +104 °F)
Protection class (DIN EN 60529) IP40
Material Carbon, aluminum, plastics
Weight 7.0 kg (without controller)
Control and display elements 2 LEDs on each camera (for device status, power, data transmission)
Sensor SDK Micro-Epsilon 3D Sensor-SDK
3D evaluation software Micro-Epsilon 3DInspect
Functional extension - 3DInspect
Automation
- 3DInspect
Automation
- 3DInspect
Automation
Surface analysis software
(optional) surfaceCONTROL DefMap3D
1) Measured on measuring object with cooperative surface in the mid of the measurement area while the “En-
hancedSNR” parameter is enabled and a 3x3 mean value filter is used once at a consistent room temperature.
2) Duration that the sensor requires for the image acquisition of the pattern projections (without processing and evalua-
tion time).
3) Applies for exposure times < 25 ms
4) Projector with active cooling. Air-cooled. Projection area and cooling area are separated.