Page 8
Safety
optoNCDT ILR 1191
Avoid shock and vibration to the sensor.
> Damage to or destruction of the sensor
Protect the cables against damage.
> Failure of the measuring device
Do not turn the module on if there is fogging or soiling on its optical parts.
> Failure of the measuring device
Do not touch any of the module’s optical parts with bare hands. Proceed with care when removing dust or
contamination from optical surfaces.
> Failure of the measuring device
i
Information and warning signs must not be removed.
1.3
Notes on CE Identification
The following applies to optoNCDT ILR 1191:
- EU directive 2004/108/EC
- EU directive 2011/65/EU, “RoHS“ category 9
Products which carry the CE mark satisfy the requirements of the quoted EU directives and the European
standards (EN) listed therein. The EU declaration of conformity is kept available according to EU regulation,
article 10 by the authorities responsible at
MICRO-EPSILON MESSTECHNIK
GmbH & Co. KG
Königbacher Straße 15
94496 Ortenburg / Germany
The sensor is designed for use in industry and satisfies the requirements of the standards
- EN 61326-1: 2006
- EN 61010-1: 2001
The system satisfies the requirements if they comply with the regulations described in the instruction manual
for installation and operation.
Summary of Contents for optoNCDT ILR 1191
Page 1: ...ILR 1191 300 Instruction Manual optoNCDT ILR 1191...
Page 6: ...Page 6 optoNCDT ILR 1191...
Page 63: ......
