MICRO-EPSILON optoNCDT ILR 1191, Instruction Manual

Page: 15 / 64

Page 15
Functional Principle, Technical Data
optoNCDT ILR 1191
Model ILR 1191-300
Trigger output HIGH = 4 V / max. 50 mA, trigger signal is output with each measurement,
LOW < 0.5 V
Serial interface RS232 and RS422 with 9.6 kBaud up to 460.8 kBaud, format 8N1, ASCII
SSI interface (RS422), 24 bit Gray code,
transfer rate: 50 kHz up to 1 MHz, 25 µs pause
Profibus Profibus RS485 DP-V0 Slave acc. to IEC 61158/ IEC 61784
transfer rate: 9.6 kBaud up to 12 MBaud
Operation mode single / continuous measurement, external triggering, speed measurement
Analog output
4 mA … 20 mA, R
L
£
500 Ohm, 16 bit DAC,
temperature stability typic 20 ppm/°C
Supply voltage 10 … 30 VDC
Max. power consumption < 5 W without heating, 11.5 W with heating at 24 V
Connectors 1 x 12-pole (Binder series 723) M16,
2 x 5-pole (Binder series 766) M12 B-coded
Protection class IP 67
Dimensions 136 mm x 57 mm x 104 mm
Housing material aluminium strangeness profile, powder-coated
Weight 800 g (depends on equipment)
EMC EN 61326-1: 2006 and EN 61010-1: 2001
1) Depending on target reflectivity, stray light effects and atmospheric conditions
2) Statistical spread of 95 %
3) Distance range to the target being measured: 0.5 m up to 700 m to the sensor