Micom P721, Technical Manual

Page: 227 / 334

Communication database P72x/EN CT/A11
MiCOM P721/P723 Page 37/78
CODE DESCRIPTION
bit 9 (bit 41):
bit 10 (bit 42):
bit 11 (bit 43):
bit 12 (bit 44):
bit 13 (bit 45):
bit 14 (bit 46):
bit 15 (bit 47):
Word 4:
Not used
F20 Unsigned long: logical input settings and signalization
Word 1:
bit 0:
bit 1:
bit 2: Unlatch output relays
bit 3:
bit 4:
bit 5:
bit 6: Auxiliary input 1
bit 7: Auxiliary input 2
bit 8: Blocking logic 1
bit 9: Blocking logic 2
bit 10: Start disturbance
bit 11:
bit 12: Setting group 2 selection
bit 13:
bit 14:
bit 15:
Word 2:
bit 0 (bit 16):
bit 1 (bit 17): Reset of all alarms
bit 2 (bit 18): Maintenance mode
bit 3 (bit 19): Auxiliary input 3
bit 4 (bit 20): Auxiliary input 4
bit 5 (bit 21):
bit 6 (bit 22): Local mode
bit 7 (bit 23): Synchronization
bit 8 (bit 24): [87CZ] check zone
bit 9 (bit 25):
bit 10 (bit 26):
bit 11 (bit 27):
bit 12 (bit 28):
bit 13 (bit 29):
bit 14 (bit 30):
bit 15 (bit 31):
F21 Unsigned integer: software version
100: Version 10.A
101: Version 10.B
110: Version 11.A
…
F22 Unsigned integer: Trip status
bit 0: Trip output relay RL1 latched
bit 1: Memorization of trip information
bit 2 to bit 15: free
F23 Unsigned integer 8 bits: Device status
bit 0: Device status
bit 1: Minor material alarm
bit 2: Presence of non-acknowledged event record
bit 3: Synchronisation state
bit 4: Presence of non-acknowledged disturbance record
bit 5: Presence of non-acknowledged fault record
bit 6:
bit 7: