Micom P721, Technical Manual

Page: 115 / 334

Getting Started P72x/EN GS/C21
MiCOM P721/P723 Page 5/24
−
Validate using or cancel using . If the password is correct, the following message is
displayed on the LCD: PASSWORD OK
As soon as the password has been entered, no setting change will be accepted via the
remote or local communication port (RS485 or RS232).
Alternatively, the password can be entered by using the Password window in the
OP.PARAMETERS menu. This password entry procedure is the same as above.
NOTE: In case of loss of password a back up password can be provided
contacting Schneider Electric sale office or factory.
2.1.3 Setting the language
−
Go to the “OP. Parameters” menu by pressing and then to the “Language” menu by
pressing , ,
−
If necessary, enter the current password and validate with ,
−
Select the language using or arrows, and validate with ,
−
Validate using or cancel using .
2.1.4 Setting Date and time
−
Go to the “OP. Parameters” menu by pressing and then to the “Date” menu by
pressing ,
−
If necessary, enter the current password and validate with ,
−
Set the date using or arrow, and validate with (10/11/08 means November 10th
2008),
NOTE: When you modify the date, the first digit for the day or the month can
be selected according to the second digit. For instance, if 13/09/08 is
displayed, you cannot select 33 for the day, or 29 for the month.
−
Validate using or cancel using .
−
Select the “Time ” menu by pressing 2 key,
−
Set the date using or arrow, and validate with (14:21:42 means 2:21:42 pm)
2.1.5 Menu navigation
A simple menu structure (refer to P72x/EN HI section) allows setting and reading of
parameters and functionality.
The keypad provides full access to the menu options, with informations displayed on the
LCD.
−
Press , , and keys for menu navigation:
•
Press or keys to navigate from a menu heading to another menu heading (refer to
the figure below),
•
Press key to access to a sub menu, then navigate using or keys.
−
Maintain these keys pressed to scroll through the menu,
−
If necessary, modify a parameter by pressing key.
•
Modify the corresponding parameter using arrows,
•
Validate using , or cancel using .