Smart Swing 3
®
Installation Manual
SMART SWING 3 ®
Page 4 of 36
1.0
Product Summary
Smart Swing 3 is a universal non-handed, electro-mechanical swing door operator, which provides powered door
opening upon activation.
Designed to facilitate barrier free access into and within buildings, through swing doors.
SMART SWING 3 features enable the continuous automation of pedestrian doors, whilst offering Low Energy barrier
free access. Designed to achieve the highest degree of safety whilst offering a long service life.
During the opening cycle, the spiral spring is tensioned by the rotation of the output shaft. During the closing cycle,
the accumulated spring force is released in the closing direction. The spring force can be adjusted so there is
appropriate force to close the door when it is operated manually or in case of a power failure.
Opening - When an open signal is received by the control unit, the door is opened at the factory set or pre-adjusted
opening speed. Before the door is fully open, it will begin its back check, slowing automatically to low speed. The
motor stops when the selected full open angle has been reached. The open position is held by the motor.
If the door is obstructed while opening, it will either creep at slow speed or stop (hold) which can be selected within
the control settings via the visual display.
Closing - When the activation time has elapsed, the operator will close the door automatically, using spring force and
motor power. The door will slow to at latch speed before it reaches the full closed position. The door is kept closed
by spring power assisted by the motor.
Power Failure - During power failure the operator acts as a door closer with controlled closing speed.
The SMART SWING 3 can be surface or concealed mounted on either side of the door header for left, right, pull or
push applications. It is suitable for either single or double door opening, being either hinged or center hung mounted.
This operator is for internal use only.
