Smart Swing 3
®
Installation Manual
SMART SWING 3 ®
Page 17 of 36
Step 3.
Set 3-position switch
to manual (0) and allow the
door to close under spring
power.
Mark the closed position
where the roller touches the
door.
Step 4.
Position slide track
horizontally within 1
st
and 2
nd
mark, then fix it to the door.
Slide the roller along the
channel, followed by fitting
end caps.
Step 5.
Turn 3-position switch to automatic (I). Press Test/Learn button to begin the learning cycle. See Learning Door Cycle.
6.0 Learning Door Cycle
“TEST/LEARN” button is currently used for two functions.
a. TEST - If the
‘TEST/LEARN’ button is pressed for less than 3 seconds and released, an activation will be generated.
b. LEARN - If the button is pressed for at least 4 seconds and released, a door re-learn is selected.
Re-learn is confirmed
by pushing the “ENTER” button.
Re-learn can be cancelled by pushing the
“TEST” or “MENU” or “UP” or “DOWN” button.
