HLP-SERIES Hot Water Pressure Washer Operator's Manual
3
introduction
Congratulations on the purchase of your new HLP-Series pressure washer! You can be assured your pressure washer
was constructed and designed with quality and performance in mind. Each component has been rigorously tested to
ensure the highest level of acceptance.
This operator's manual was compiled for your benefit. By reading and following the simple safety, installation, operation,
maintenance and troubleshooting steps described in this manual, you will receive years of trouble free operation from
your new pressure washer. The contents of this manual are based on the latest product information available at the
time of publication. Mi-T-M reserves the right to make changes in price, color, materials, equipment, specifications or
models at any time without notice.
! important !
these paragraphs are surrounded by a "safety alert boX." this box is used to designate and
emphasize safety Warnings that must be followed when operating this pressure washer.
accompanying the safety Warnings are "signal words" which designate the degree or level
of hazard seriousness. the "signal words" used in this manual are as follows:
DANGER
:
indicates an imminently hazardous situation which, if not avoided, Will
result in death or serious injury.
WARNING
:
indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
:
indicates a potentially hazardous situation which, if not avoided may
result in minor or moderate injury.
the symbols set to the left of this paragraph are "safety alert symbols." these symbols
are used to call attention to items or procedures that could be dangerous to you or other
persons using this equipment.
alWays proVide a copy of tHis manual to anyone usinG tHis eQuipment. read
all instructions before operatinG tHis pressure WasHer and especially
point out tHe "safety WarninGs" to preVent tHe possibility of personal
inJury to tHe operator.
Once the unit has been removed from the box, immediately write in the serial number of your unit in the space provided
below.
serial number_________________________________
Inspect for signs of obvious or concealed freight damage. If damage does exist, file a claim with the transportation
company immediately. Be sure that all damaged parts are replaced and that the mechanical and electrical problems
are corrected prior to operation of the unit. If you require service, contact Mi-T-M Customer Service.
CUSTOMER SERVICE
CALL OUR TOLL-FREE NUMBER
for the Sales or Service Center nearest you!
800-553-9053
Please have the following information available for all service calls:
.
Model Number
2.
Serial Number
3.
Date and Place of Purchase
