HLP-SERIES Hot Water Pressure Washer Operator's Manual
9
preparation instructions
. Before starting the unit, perform the following procedures:
a. Check for gas smell. If a gas smell is detected, DO NOT START UNIT!
See "Risk of Explosion or Fire" warnings, pg. 4.
b. Check all hose connections to ensure they are securely tightened.
c. Inspect for system water and oil leaks.
d. Inspect high pressure hoses for kinking, cuts and leaks. If a kink, cut
or leak is found, DO NOT USE HOSE! Replace hose before starting
unit. See "Risk of Injection" warnings, pg. 7. Be sure that all damaged
parts are replaced and that the mechanical problems are corrected prior
to operation of the unit. If you require service, contact your Customer
Service Representative.
pre-start inspection procedures:
