MGG Gizmow T130, Operator'S Manual

Page: 10 / 96

Lawn Tractor Rear Discharge
10
KNOW YOUR PRODUCT
1. Gear Shift Lever. Changes the directional
movement of the lawn tractor from reverse, neutral,
forward. It also and helps determine the acceleration
of the lawn tractor.
2. Steering Wheel. Turns and controls the direction
of the front wheels.
3. Gas Control Lever (Choke Control and Throttle
Control Lever).
Choke control (upmost position)
improves the mixture and therefore should be
used when the engine is starting from cold.
Accelerate lever (position between low to fast)
regulates the engine's r.p.m.
4. Blade Engagement Lever. For switching the blades
driver on and off
5. Key Ignition Switch. This switch has 3 setting:
a. OFF: Everything is switched off
b. ON: Activates all parts
c. START: Engages the starter motor
6. Dashboard Display. When the key is turned to
«ON», all the lights come on at the same time for
about half a second to indicate that the machine
is working properly. Afterwards, when a warning
light comes on, it indicates the following signal
lamps:
a. Blades Engaged
b. Parking Brake Engaged
c. Driver Seat Free
d. Missing Container
e. Headlights On
f. Battery Charging
7. Brake and Clutch Pedal. This pedal has a double
IXQFWLRQGXULQJWKH´UVWSDUWRILWVWUDYHOLWDFWV
as a clutch, engaging and disengaging drive to
the wheels, and in the second part it acts as a
brake on the rear wheels.
8. Headlight Switch. This allows you to turn on the
lights «ON» or «OFF».
9. Parking Brake Button. This button allows you
to stop the lawn tractor from moving when it has
been parked. There are two positions, which will
be indicated on the dashboard display signal lamp:
a. Brake Off
b. Brake Engaged
10. (Cutting Height Adjusting) Lift Lever.
This lever allows you to adjust the blade height
to seven positions which range from 3cm – 9cm.
11. Cutting Deck. This is the guard which encloses
and covers the rotating blades.
12. Cutting Blades. These are components which
cut the grass. Specially designed wings at the
ends help push the cut grass towards the
collector channel.
13. Collector Channel. This is the part which
channels the cut grass and connects the cutting
deck to the grass catcher.
14. Grass Catcher. Apart from collecting the grass
clippings it also acts as a safety element by
stopping any objects drawn up by the blades
from being thrown outside of the machine.
6WRQH*XDUGRU'HµHFWRUFXUUHQWQRW
available) 7KLVFDQEH´WWHGLQSODFHRIWKH
grass-catcher and prevents objects drawn up
by the blades from being thrown outside of the
machine.
16. Engine. This controls the blades and drives the
wheels.
17. Battery. Provides the energy to start the engine.
18. Driver’s Seat. This is where the lawn tractor
operator sits.
19. Regulations and Safety Decals. Provides
important reminders on the main provisions for
working safely.
20. Inspection Hatch. Allows access for making
several adjustments.
21. Handle for Tipping Grass Catcher. This is a
manual operation and allows the grass catcher
to be tipped in order to empty the grass
clippings.
IMPORTANT: Before you commence using
your lawn tractor, you need to familiarize
yourself with the location and the
operation of the controls. This will reduce
the chances of any accidents occuring
and will enhance the performance of the
lawn tractor.
IMPORTANT: Do not have the pedal
in half way of clutch engagement
or disengagement because it will
cause overheating and damage the
transmission belt. When the lawn
tractor is moving, ensure your foot
is of the pedal.