MGG Gizmow T130, Operator'S Manual

Page: 28 / 96

The following diagrams will show you the points requiring
checks, lubricating and routine maintenance. It also provides
the type of lubricant to be used and the frequency required.
MAINTENANCE
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
Lawn Tractor Rear Discharge
28
Safety
Lubrication Instructions
WARNING: Before you commence with
cleaning, maintenance or repair work,
remove the ignition key and read the
relevant instructions. Ensure that you are
wearing suitable clothes and strong work
JORYHVZKHQGLVPDQWOLQJDQGUH´WWLQJWKH
blades or in any other hazardous situations
where your hands can be injured.
WARNING: Never operate the lawn tractor
if parts are worn or damaged. It is essential
that faulty or worn-out parts are always
replaced and not repaired. Genuine spare
parts must only be used: those that are not
of an equivalent quality may damage the
machine or endanger the safety of yourself
and others.
IMPORTANT: Never dispose of used oil, fuel
or other pollutants in unauthorized places!
Check with you local council for relevant
laws or guidelines.
Periodic Maintenance
F r e q u e n c y C o m p o n e n t s
General Purpose Grease, such as
King pins of the front axle
Steering pinion and segment
Segment pin of the travel lever
Oil with ingredients of molybdenum,
such as:
Steering joints
Central pin of the front axle
Segment mounting
Rotary places and pawls of the cutting
mechanism and travel lever
Rotary places of the drive conversion
unit
Central pulley mounting of the drive
conversion unit
Brake pedal mounting
Cable of blades drive and of the gas
operating
Suspension joints of the mowing
mechanism
Sliding way of the seat (if equipped)
and driven chain of the gearbox.
The gearbox
Antifriction bearing of the rear and
front axle and of the blades
Needle bearings of the pulley in the
drive conversion unit
Needle bearings of the chain
transmission
Once a month
(25 hours)
Once a month
(25 hours)
Permanently
greased
Grease
OIL - SAE 30
Fig 37