www.mgeups.com
Network
Management Cards
User Manual
T H E U N I N T E R R U P T I B L E P O W E R P R O V I D E R
Network Management Card
– User Manual
34003676EN/BB
Page
30/76
◗
Environment alarms
: (accessible when
Show advanced events
option is ticked)
Environment alarms
must be selected to activate e-mail notification of events concerning the Environment
Sensor. The detail of notified events is accessed via the
Configure Environment
link.
◗
Recipient List:
On the right side of this page, up to four recipients can be configured to receive e-mails from the card. Each
addressee has his own trigger events, selected from the left side of the page, for which an e-mail is sent. The
card’s log indicates e-mail transmission errors.
Each recipient is configured with the following parameters:
Recipient:
this is the e-mail address of the person or department to receive the e-mail.
The default value is
.
Attached files
: The files selected (UPS measurements, Event log, System log or Environment measurements)
are enclosed with each e-mail sent. The files are sent in CSV format.
Periodic report
: In addition to the e-mails sent when events occur, a periodical e-mail containing the 4 log files
can be sent to the recipient every
x
days at the time specified by the user.
To configure the first transmission, specify the day, time and frequency of the next transmission in the
Day of
next report
box. After this date, the page will show the date and time of the next transmission.
Data are sent in CSV format.
Save:
Saves any modifications.
Test:
enables an e-mail to be sent to the recipient immediately. This is one way of checking e-mail
transmission, particularly access to the SMTP server configured in “Network settings”. A transmission report is
added to the system log. In the event of failure, the card will repeat the transmission 3 times, at one minute
intervals, before producing a transmission report.
The event label in the subject and text of the message is replaced with a test label.
If the user makes any modifications to the page, they must be saved before using the
“Test”
function.
E-mail message configuration:
see next page
Network settings:
enables the name of the SMTP server to be entered. See “
Network settings
”
Security:
The administrator has to click on
Save
and enter his login/password to save any modifications. The
default login and password are
: MGEUPS
