www.mgeups.com
Network
Management Cards
User Manual
T H E U N I N T E R R U P T I B L E P O W E R P R O V I D E R
Network Management Card
– User Manual
34003676EN/BB
Page
7/76
1.1.4 Connection
Before installing the MGE Network Solution, the UPS must be set up as indicated in the steps below.
◗
Shut down the computers to be protected by the UPS.
Connect the UPS to a wall outlet. (For UPSs above 3kVA, please refer to the UPS installation manual)
◗
Connect the power cord of each computer to an outlet on the UPS. (For UPSs above 3kVA, please refer to
the UPS installation manual)
1.1.4.1 How to connect UPS / agent / network :
◗
Insert the optional card in the UPS and connect the UPS to the computer network.
◗
Start the MGE UPS, then the computers.
1.1.4.2 Setting up the protection
◗
Set up the Network Management Card (see user manual).
