www.mgeups.com
Network
Management Cards
User Manual
T H E U N I N T E R R U P T I B L E P O W E R P R O V I D E R
Network Management Card
– User Manual
34003676EN/BB
Page
37/76
◗
Note
:
Alarm notification remains in English / French (reboot the browser after modification).
SNMP message remain in English.
◗
Environment log interval:
[from 5 to 99999 sec ]. Temperature and humidity measurement save period.
Default value = 300 sec. (only visible if the sensor is present).
◗
Environment refresh rate:
[from 5 to 99999 sec].
“Environment status”
page refresh rate. Default value
= 60 sec. (only visible if the sensor is present).
◗
Environment input grace period :
[from 0 to 9 sec ]. Period during which a status change by one of the
inputs is not considered. Default value = 1 sec. (only visible if the sensor is present).
◗
“Reset communication” button:
performs a remote reboot of the card without modifying the configuration.
This action is compulsory for consideration of any changes made on
the “Network settings
”
page. Security
of this operation is ensured by requesting Login and Password.
◗
“Fatory Reset” button:
enables restoration of the default configuration of all the card’s parameters. The
TCP/IP parameters: IP address, subnet mask, gateway and BootP/DHCP value are maintained if the
“Keep TCP/IP parameters”
option is selected. Security of this operation is ensured by requesting Login
and Password. Default login and Password are
: MGEUPS
Note
:
If any of these parameters are changed, the card must be rebooted.
