Meyra 1.610, Maintenance And Service Manual

Page: 79 / 104

79
Lifting rod, model 1.612
For disassembly of the seat unit it is recommended to take
off all removable parts [1]
Removing the lifting rod
For removal, drive the lifting rod and inclination into the re-
spective highest position [1].
1. Pull the connection plug of the adjustment module (2)
off of the power module.
2. Pull the plugged connections of the back lights (3) and
place the cable harness to the top onto the seat plate.
3. Pull the connection plugs from the micro switch, for
height regulation of the lifting rod, off of the adjust-
ment module underneath the seat plate [4] and guide
it to the front [5].
☞
Therefore observe chapter
Power module, replac-
ing the lighting, resp. lighting/adjustment module on
page 67.
4. Disassemble the screws (6) for attachment of the seat
frame.
5. Carefully remove the seat unit [7] and put it aside.
6
6
3
2
3
1
4
5
7