Meyra 1.610, Maintenance And Service Manual

Page: 17 / 104

17
Leg support receptacle
For external seat systems the leg support receptacles (1) are
to be adjusted to the amended seat height.
Adjusting the leg support receptacle to the thigh
length
To reposition the leg support receptacle (1) into one of the
other two screw positions, both screws (2) need to be re-
moved.
☞
The distance of the screw positions is 3 cm each.
Adjusting the height of the leg support receptacle
1. Therefore dismantle the respective leg support recep-
tacle (1), turn vertically by 180° and reassemble on the
opposite side [3].
2. Afterwards dismantle the leg support locking device
(4), turn vertically by 180° and reassemble in the lowest
screw position [3].
☞
If required the hole ø 6.1 mm is carried out acc. to draw-
ing [5] during the assembly.
All dimensions in [mm].
1
2
4
3
5