Meyra 1.610, Maintenance And Service Manual

Page: 72 / 104

72
Seat inclination (camber),
model 1.610 / 1.611 / 1.614 / 1.615 / 1.616
Replacing the adjustment motor for seat inclination
1. Pull the connection plug of the corresponding adjust-
ment motor for seat inclination [1] out of the adjust-
ment module and guide it to the front.
2. Remove the tube folding plug (2) as well as screw (3)
for attachment of the adjustment motor for seat incli-
nation.
☞
In doing so watch for cables that might still be attached.
– If required, remove corresponding cable binders.
Assembly of the adjustment motor is done analogue in re-
verse order.
☞
Only mount the lifting rod to the rear attachment po-
sition (4).
!
Attention:
It is to be observed that the cables are not damaged or
bent when being placed.
☞
Otherwise danger of fire through short circuits!
☞
Previously removed cable ties are to be replaced.
☞
Then carry out a function test.
☞
Therefore observe chapter Functional checks on
page 94.
2
3
4
1