Meyra 1.610, Maintenance And Service Manual

Page: 25 / 104

25
Back support upholstery
After opening the velcro fastener the back support cushion
[1] can be taken out of the back support shell.
Limit switch
☞
(not with model 1.617 / 1.616)
The limit switch (2) prevents exceeding the back support
angle in combination with the electric angle adjustment of
the back support and electric camber of the seat unit.
Replacing the limit switch
In order to replace the limit switch (2) the grooved pin (3) is
to be removed.
Cable fitting
☞
The cable of the limit switch is attached with a cable tie.
☞
The cable of the operating module is fastened back
support bracket with a cable clamp (4).
Replacing the push bar
In order to replace the push bar, e. g. order to change the
seat width, the attachment screw on both sides (5) need to
be removed.
4
5
2
3
1