Metz Astral 72 Slim Page 82 Operating Instructions Manual Download

Page: 82 / 100

then displayed. If further recording devices
exist, you can select the desired device with the
aid of
the

- +

key.

• Press the "

" key to save the settings.

• On the playback device (in this example, the

DVD player) start the film which is to be copied.

• On the recording device (in this example, the

video recorder), select the AV programme posi-
tion (in most cases AV1).

• On the recording device, start a direct recor-

ding by pressing the appropriate button (

REC

OTR

, etc.).

The TV set is now set up so that the signal coming
from the playback device is connected directly to
the recording device.

36. Copying between AV Devices

Direct recording

Summary of Contents for Astral 72 Slim





































































































Search results

Summary of Contents for Astral 72 Slim

Reviews:

Related manuals for Astral 72 Slim

Brands by name

Popular brands

Metz Astral 72 Slim, Operating Instructions Manual

Search results

Summary of Contents for Astral 72 Slim

Reviews:

Related manuals for Astral 72 Slim

Brands by name

Popular brands