Metz Astral 72 Slim Page 27 Operating Instructions Manual Download

Page: 27 / 100

12.1 Sound Settings for

Programmes via TV Menu

Opening the menu

Some of the menu items are not available
in a 2 ** menu.

Volume correction

Various TV stations broadcast their programmes
with different sound volumes. This volume diffe-
rence can be minimised by correcting the volume.
This adjustment remains active even if the stan-
dard sound values are recalled.

Adjusting the volume correction:

• Press the "

MENU

" key.

The TV menu appears on the screen.

• Press the blue key

. The menu

"Picture and sound" and the menu
item "General picture settings" are
pre-selected.

• Use the corresponding numeric key

(in the example:

) to select "Sound

settings for Pr.".

• Press the "

" key and then, in the

setting widow, use the

- +

key to

change the setting.

• Press the "

" key to save the new settings.

• Press the "

EXIT

" key to close the TV menu.

Individual sound settings can also be made
in the station table.

☞

Forced mono
Tone settings
Volume correction

Sound set,.prog.pos
Sound settings, gen.
Pict.set.,prog.posn.
Pict. settings, gen.

Volume correction -15

Change with

Accept value with.

EXIT

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

– +

Summary of Contents for Astral 72 Slim





































































































Search results

Summary of Contents for Astral 72 Slim

Reviews:

Related manuals for Astral 72 Slim

Brands by name

Popular brands

Metz Astral 72 Slim, Operating Instructions Manual

Search results

Summary of Contents for Astral 72 Slim

Reviews:

Related manuals for Astral 72 Slim

Brands by name

Popular brands