manualshive.com logo in svg

Metz Astral 72 Slim, Operating Instructions Manual, Page: 78 / 100

Share
Download
Metz Astral 72 Slim Operating Instructions Manual Download Page 78

78

32. Connecting Headphones

The headphone socket is located behind the flap
on the front of the TV set. Open the flap as descri-
bed in sections 31 and 35.

We recommend the use of headphones with an
impedance of at least 32 

Ω

. The use of headpho-

nes with a lower impedance will reduce the dyna-
mic range of the sound.

You can save the headphone volume as a stan-
dard value.

When receiving a dual-language pro-
gramme, you can switch between the
two sound channels.

In TV mode, press and hold the yellow
key 

until the sound function "Sound

mode" is selected.

Then use the 

- +

key to select Sound 1

or Sound 2.

Before cleaning the TV set, always switch it
off with the main power switch!

Clean the case of the TV set with a soft dry cloth.
If necessary, you can moisten the cloth slightly. Do
not use aggressive detergents or solvents, since
these may damage the paintwork and the inscrip-
tions. Clean the screen with a moist window leat-
her.

☞

34. Cleaning the TV Set

33. Sound 1, Sound 2

Headph. Vol.

Sound mode  Channel 2

Spatial

Spatial 

Sound mode  Channel 2

Balance 

Summary of Contents for Astral 72 Slim





































































































Reviews:

No comments