METVISA BIMG FP 12 Series, Instruction Manual

Page: 7 / 20

7
IMPORTANTE
The manufacturer does not take responsibility for any direct or indirect damages caused by
non-compliance with these rules and other instructions presented in this manual.
4. Equipment Use
4.1 Utility
This equipment is exclusively intended for slicing breads.
4.2 Commands
The equipment has an on/off button and a guide with a bread holder.
The power switch is located on the rear of the equipment, near the power cord. The guide
and the bread holder, on the other hand, are between the protection door and the upper covering.
See the description of each command below:
•
On/Off Button
– used to turn the equipment on and off. In position “1” it turns on, in position “0” it
turns off.