METVISA BIMG FP 12 Series, Instruction Manual

Page: 5 / 20

5
2.2 Technical Data
Model
Standard Measures
Length.xHt.xWidth
(mm)
Net weight
(kg)
Voltage
(V)
Rate
(A)
Useful Area
LengthxWidth
(mm)
FP12110M604 521x1365x915 72 110 3.7 360x150
FP12220M501 521x1365x915 72 220 2.2 360x150
FP12220M502 521x1365x915 72 220 2.2 360x150
FP12220M504 521x1365x915 72 220 2.2 360x150
FP12220M507 521x1365x915 72 220 2.2 360x150
FP12220M604 521x1365x915 72 220 2.1 360x150
Noise level (equipment with bread): 68 dB.
ATTENTION!
Characteristics like: model, serial number and voltage of the equipment are provided on the
label (figure below). Before installation, check that the power supply voltage of the
equipment corresponds to that of the mains
3. Installation
3.1 Equipment Layout
Connection to the electrical network and setup for operation must be carried out by a
qualified professional. Check if the equipment voltage is in accordance with the electrical network.
During installation, it is essential to make this manual available to the professionals who will
carry out the installation.
To ensure correct operation and safety, the equipment must be positioned in a sufficiently
large area, with a well level, dry and stable floor, away from heat sources and water taps, and in a
place where there is no heavy traffic of people. Install your equipment leaving a distance of at least 80
cm around it so that it has enough space for inspection, maintenance, cleaning and use.