WESROC© RMS Satellite Repeater – User Manual
Metrotel Corporation of Minnesota, Inc.
Revision A. May 7, 2008
Page 21
Note: Weekly report and monthly reporting functions use an “OR”
condition. If a particular day meets either the day of the week
reporting OR the day of the month reporting, then a report is
scheduled for that day.
The “Monthly Rpt:” line indicates how many days are currently set for day of the
month reporting. If no days are set, then this line will show “None”. To change the
monthly reporting for the current transmitter, move cursor to this line and press
the right button. The following screen will be displayed.
Day of the Month Scheduled Reporting Configuration Screen
To change the status for the current day of the month, move the cursor to the day
to be changed and press the right button. This toggles the report request for the
selected day of the month. The display of the PDU shows eight lines at any given
time. The first screen will show days of the month 1
st
through 8
th
. To change days
of the month beyond the 8
th
, continue to move the cursor down. Each down
button press will shift the day of the month entries up one. Editing the reporting
status of the days of the month is the same for every day (i.e. 1
st
, 2
nd
, 3
rd
, etc...)
The actual change request is not sent to the satellite repeater until all desired
changes are made to the day of the month reporting. Once the left button is
pressed to return to the transmitter configuration screen, then the change request
is sent to the satellite repeater. The Satellite Repeater will implement the change
and reply with updated information. The values shown in the transmitter
configuration screen will only be what the actual current setting is.
