WESROC© RMS Satellite Repeater – User Manual
Metrotel Corporation of Minnesota, Inc.
Revision A. May 7, 2008
Page 16
the right button. Move the cursor left or right to the decade to modify: 1’s, 10’s,
100’s etc… A press of the up button adds that many minutes to that column
(1,2,3,4 or 10,20,30,40 etc…). When the desired number is entered, from the
right most digit (1’s), press the right button. The screen goes back to the
configuration screen and the requested initialization mode minutes are sent to
the Satellite Repeater. The value shown in the configuration screen is the value
sent by (and understood by) the Satellite Repeater. This is to ensure that the
value was received.
Once initialization mode minutes are set, they begin an automatic countdown in
the Satellite Repeater. Once this timer reaches zero, the countdown stops and
the Satellite Repeater exits from initialization mode.
Transmitters Initialized:
This shows the total number of transmitters that have been initialized to the
Satellite Repeater. This is helpful in indicating that a successful initialization has
taken place. Presently, the Satellite Repeater can be initialized to up to sixteen
transmitters. This entry is not editable.
Configure Transmitter Function
This is the entry function to the Transmitter Configuration Screen. This screen is
used for the configuration of parameters related to specific transmitters. Each
transmitter is configurable independently. To enter the transmitter configuration
screen, move the cursor to this entry and press the right button.
