Metrologic MS7320 InVista Series, Installation And User Manual

Page: 16 / 60

12
I
NSTALLATION OF AN
A
UXILIARY
S
CANNER
11. Configure the auxiliary scanner to send formatted data to the MS7320.
Normal slave mode operation will only require reserve Code 32 to be set in
the auxiliary scanner. The following bar code applies for all scanners,
except the MS6720 , to be used as an auxiliary scanner. Contact a
Metrologic representative for additional information on the MS6720.
³ 1 2 4 8 1 7
Reserve Code 32
Metrologic recommends disabling the beeper on the auxiliary scanner.
Refer to ‘Beeper Options’ in the Communications section of the
MetroSelect Configuration Guide (
MLPN
00-02407A-1 & -2).
12. Configure the MS7320 to activate the auxiliary port. Enable the auxiliary
port and configure it to recognize slave formatted data with the following bar
code:
³ 4 3 7 3 3 0
Enable Aux Port
13. Turn on the host system.