background image

4.7 Results

■■■■■■■■■■■■■■■■■■■■■■

100

■■■■■■■■

873 Biodiesel Rancimat

ID 1

Sample identification 1.

ID 2

Sample identification 2.

Determination date

Date and time at which the determination was started.

User

Name of the user logged in when recording the determination.

Serial number

Serial number of the instrument used to record the determination.

Cell constant

Cell constant of the conductivity measuring cell used to record the deter-
mination.

GLP test

GLP status at the time of recording the determination. The following displays
are possible:

GLP test switched off

: The GLP monitoring was not activated for either

temperature or conductivity or gas flow.

GLP test due

: The next GLP test was due.

GLP test not passed

: The last GLP test carried out was not passed.

GLP test passed

: The last GLP test carried out was passed.

Display of the instrument, block and channel on which the determination
was carried out.

Summary of Contents for 1.873.0014

































































































































































































Reviews: